How to Clean a Cat Water Fountain (and How Often)

The water looks clear but the walls do not stay that way.

By the Clean Fluff Club team. Updated November 11, 2026. How we picked.

Scrub a cat fountain weekly and swap the filter monthly; our pick, the Veken Stainless Steel Pet Water Fountain, is steel, so film has nowhere to hide. Unplug, empty, scrub with warm soapy water, rinse well.

In this guide7 sections

You rinsed the bowl, the water looks clear, and your cat sniffs it and heads for the faucet. The water is fine. The walls are not: a slick film builds where you cannot see it. Here is the weekly clean.

  1. Unplug it, then empty the water.
  2. Take out the filter and lift off the bowl.
  3. Scrub the bowl with warm soapy water and a brush, including the walls.
  4. Rinse everything until no soap is left, fit a fresh filter if it is due, and refill to the line.
  5. Filter day (monthly): pull the pump and rinse it under the tap too. Brush off any hair and keep the plug and cord dry.

How often should you clean a cat water fountain?

Scrub it once a week and change the filter once a month. The pump gets its rinse on filter day, since grime collects there even when the water looks clear. If you see a slick film on the walls before the week is up, clean it sooner.

What do you wash a cat fountain with?

Warm water, a little mild soap and a brush that reaches the corners. Rinse until nothing slippery is left, because soap residue is what a cat tastes. Skip strong-smelling cleaners; a cat who snubs a still bowl is not shy about snubbing a scented one.

Why does the water look clean when the fountain is dirty?

Every water dish grows a slick film on its walls, and a fountain is no exception. Moving water keeps the water looking fresh. It doesn't clean the walls or the pump. That is why the weekly scrub stays on the list even when the basin looks fine.

Which cat fountain is easiest to keep clean?

A steel one. Plastic picks up fine scratches from weekly scrubbing, and the film settles into them where a sponge cannot reach. The Veken Stainless Steel Pet Water Fountain stands up to a stiff brush, so the clean actually leaves the bowl clean. The catch: it needs a weekly scrub and a fresh filter every month. Details in the Veken fountain review.

What is the white crust on a stainless steel fountain?

Usually mineral scale from hard water. Soak the bowl in diluted white vinegar, then rinse it thoroughly before you refill.

Fountain loud or barely flowing after you clean it?

  • Low water: fill it back to the line. A pump that pulls air gets noisy.
  • Weak flow: hair and film clog the pump and filter. Rinse the pump and fit a new filter if the old one is due.
  • Rattling: reseat the pump so it sits flat on the base.

Cat stopped drinking from it after a clean?

Leave her old bowl right next to the fountain for a few days so she always has a familiar choice. Still not drinking from either? Our guide to a cat that won't drink water starts with the bowl. A cat who drinks much more or much less than usual is a question for your vet.

Your next move

Questions people ask

How often should I clean a cat water fountain?

Scrub it once a week and change the filter once a month. Rinse the pump when the filter comes out.

Can I use vinegar to clean a cat fountain?

For white scale on a steel bowl, yes: soak it in diluted white vinegar, then rinse thoroughly before you refill.

How do I clean the pump?

On filter day, once a month. Pull it out, rinse it under the tap, brush off hair and keep the plug and cord dry.

Is a clear fountain a clean fountain?

No. A film builds on the walls and inside the pump even when the water looks clear.

Still fighting this mess?

Not sold on this one? Line it up against every travel bowls and hydration pick.

Each pick is matched to one job, with its catch up front and who should skip it.